Common Mode Filters - Danfoss VLT AQUA Drive FC 202 Design Manual

Type code and Selection
Parameter
14-01 Switching Frequency
14-55 Output Filter
14-56 Capacitance Output Filter
14-57 Inductance Output Filter
Table 6.27 Parameter Settings for dU/dt Filter Operation

6.2.10 Common Mode Filters

Enclosure size Order number
A and B 130B3257
C1 130B7679
C2, C3, C4 130B3258
D 130B3259
Table 6.28 Common Mode Filters, Ordering Numbers
W
w
Figure 6.4 HF-CM Core
MG20N622
Design Guide
Setting
Higher operating switching frequency than specified by the individual filter is not recommended.
[0] No filter
Not used
Not used
Core dimension
W [mm (in)] w [mm (in)]
60 (2.36) 43 (1.69)
82.8 (3.26) 57.5 (2.26)
102 (4.02) 69 (2.72)
189 (7.44) 143 (5.63)
d
Danfoss A/S © 09/2014 All rights reserved.
H [mm (in)] h [mm (in)]
40 (1.58) 25 (0.98)
45.5 (1.79) 20.6 (0.81)
61 (2.4) 28 (1.1)
126 (4.96) 80 (3.15)
Weight
d [mm (in)] [kg (lb)]
22.3 (0.88) 0.25 (0.55)
33 (1.3)
37 (1.46) 1.6 (3.53)
37 (1.46) 2.45 (5.4)
147
6 6