Danfoss VLT AQUA Drive FC 202 Design Manual page 78

System Integration
B
3 3
E
A Top cover
B Brim
C Base part
D Base cover
E Screw(s)
Figure 3.32 Enclosure Size A3
Place the top cover as shown. If an A or B option is used,
the brim must be fitted to cover the top inlet. Place the
base part C at the bottom of the adjustable frequency
drive and use the clamps from the accessory bag to fasten
the cables correctly.
Holes for cable connectors:
•
Size A2: 2x M25 and 3xM32
•
Size A3: 3xM25 and 3xM32
76
VLT
A
D
Danfoss A/S © 09/2014 All rights reserved.
®
AQUA Drive FC 202
Enclosure type
A2
A3
B3
B4
C3
C4
Table 3.20 Dimensions
1) If option A/B is used, the depth increases (see chapter 7.8 Power
Ratings, Weight and Dimensions for details)
B
C
D
E
Figure 3.33 Enclosure Size B3
Height A Width B
[mm (in)] [mm (in)]
372 (14.65) 90 (3.54)
372 (14.65) 130 (5.12)
475 (18.7) 165 (6.5)
670 (26.38) 255 (10.04)
755 (29.72) 329 (12.95)
950 (37.4) 391 (15.39)
A
C
1)
Depth C
[mm (in)]
205 (8.07)
205 (8.07)
249 (9.8)
246 (9.69)
337 (13.27)
337 (13.27)
F
MG20N622