System Design Checklist - Danfoss VLT AQUA Drive FC 202 Design Manual

System Integration
When bit 14=1, the limit selected in 4-16 Torque Limit
Motor Mode or 4-17 Torque Limit Generator Mode is
exceeded.
3 3

3.9 System Design Checklist

Table 3.50 provides a checklist for integrating an adjustable frequency drive into a motor control system. The list is intended
as a reminder of the general categories and options necessary for specifying the system requirements.
Category
FC Model
Power
Physical
Ambient operating conditions
Enclosure size
Input
Cables
Fuses
Options
Output
Cables
Fuses
Options
Control
Wiring
98
®
VLT
Details
Volts
Current
Dimensions
Weight
Temperature
Altitude
Humidity
Air quality/dust
Derating requirements
Type
Length
Type
Size
Rating
Connectors
Contacts
Filters
Type
Length
Type
Size
Rating
Filters
Type
Length
Danfoss A/S © 09/2014 All rights reserved.
AQUA Drive FC 202
Bit 15, Timer OK/Timer exceeded
When bit 15=0, the timers for the thermal motor
protection and thermal adjustable frequency drive
protection have not exceeded 100%.
When bit 15=1, one of the timers has exceeded 100%.
Notes
☑
MG20N622