Connecting Via Ethernet - Pepperl+Fuchs WHA-GW Manual

WHA-GW-*
Commissioning
4.5

Connecting via Ethernet

Once the gateway has been connected to the Ethernet (see chapter 3.3), you are ready to
connect your PC.
Connecting to the gateway via Ethernet
1. Connect the Ethernet cable to the Ethernet jack of your PC.
2. To communicate with the gateway, you need to configure the IP address and subnet
mask of your PC. To do this, launch the Network Connections window (Windows
Start > Settings > Control Panel > Network Connections).
3. Right-click on the icon Local Area Connection and choose Properties from the
context menu.
The Local Area Connection Properties window opens.
Local Area Connection Properties window
4. Select the list entry Internet Protocol (TCP/IP).
5. Press Properties.
The Internet Protocol (TCP/IP) Properties window opens.
®
XP:
37