Connecting The Encoders - Siemens SIMATIC S7-300 Manual

4.5

Connecting the encoders

To connect the
Please note:
connecting cables
Note
Use only shielded cables. The shielding must be connected to the metallic or
metallized connector jacket.
The cable sets supplied as an accessory offer excellent immunity from inter-
ference, as well as cross-sections large enough for the power supply to the
encoders.
Fig. 4-5
FM 354 Servo Drive Positioning Module
Connecting
cable
X3
e.g.
e.g. incremental
ROD 320
encoder
(built-in en-
with RS 422
coder in 1FT5)
Connecting the encoders
Wiring the FM 354
FM 354
X3 X3
e.g.
e.g. absolute
linear scale
encoder (SSI)
with EXE
X3
4-11