Siemens SIMATIC S7-300 Manual page 75

Table 5-9 Menus of "Parameterize FM 354", continued
Menu title or entry
(with single command)
Close
Save
Export...
Check consistency
Create SDB
Display SDB...
Print...
Print preview
Set page...
Set printer...
1 <Name of
DB last opened>
2 <Name of
penultimate DB opened>
3 <Name of third–last
DB>
4 <Name of fourth–last
DB>
Close
Edit
Undo
Cut
Copy
Paste
Replace cells
Find
Default values
FM 354 Servo Drive Positioning Module
Shortcut
Ctrl + F4 Closes the window of the current DB
Ctrl + S Saves the current data block on the programming device/PC
– Saves the current data block in a file
– Checks the data in the current window for errors
– Reads the FM data blocks which have been generated from this SDB
(system data block), and stores them on the programming device/PC.
– Displays the SDBs for the FM 354 which exist on the programming
device/PC; they can then be deleted.
Ctrl + P Prints all or part of the current data block
– Displays the document in the print preview - no editing possible
– Specifies page layout for printing
– Sets up the printer and sets print options
– Opens the DB which was last opened
– Opens the DB which was open before the last one
– Opens the third–last DB
– Opens the fourth–last DB
Alt + F4 Closes all parameterization windows and ends parameterization
– Undo the last action, cut, copy, paste and delete selected objects,
search and default value
Ctrl + Z Undoes the last action
Ctrl + X Deletes the selected data and saves it in a buffer (clipboard)
Ctrl + C Copies the selected data to a buffer (clipboard)
Ctrl + V Inserts the clipboard contents at the cursor position
– Overwrites the field in a table with the clipboard contents
Ctrl + F Searches for text; the text may also be a number (e.g., MD No.)
– Fills the current data block with default values
Defining Parameters of the FM 354
Significance
5-23