Connecting The Encoders (C230-2, C240) - Siemens SIMOTION C Operating Instructions Manual

Connecting
5.1 Wiring
5.1.6

Connecting the encoders (C230-2, C240)

Connecting the connecting cable
Note the following:
Note
Always use shielded data cables. The shielding must be connected with the metallic or
metallized connector housing.
The pre-assembled cable available as an accessory provides the best possible immunity to
interference and adequately dimensioned cross-sections for the power supply to the
encoders.
Figure 5-15
114
Encoder connections
SIMOTION C
Operating Instructions, 02/2012