Starting The Electric Motor - JLG X20JPLUS Operator, Safety, Maintenance And Service Manual

MUX20JP021602
The machines with Diesel engines are equipped with an automatic preheating sy‐
stem. Pushing button 0 (10) on remote control will be activated a preheat of 10 se‐
conds. If the engine will be started during this time the preheat is stopped. See
paragraph concerning the functions of the remote control ʺPush buttons (p. 61)ʺ
before using this option.
The engine must be started with all the control buttons and joysticks
in neutral position. Always make sure there are no foreign objects
(e.g. Branches) that may accidentally operate a control, as the pla‐
tform may move suddenly out of the operatorʹs control and cause se‐
rious harm to things and/or people. Make sure that all the manual
controls for the proportional valves are at rest.
11.4.3.Starting the electric motor
• Before starting the motor, be clearly aware of all the procedures described in
the USER AND OPERATION MANUAL and get familiar with the meaning of the
safety stickers.
• Examine the safety rule summary table in the manual and follow all the in‐
structions given therein.
• Power the machine with an electric cable through the connection positioned
at the bottom near the electric motor. Close the switch located in the electrical pa‐
nel near the motor.
Fig. 84 Power line connection
Before connecting the machine to the main power supply:
Boom Lift Models X20JPLUS
USING THE MACHINE
Fig. 85 Main electric switch
91