Machined Area Menu; Machined Area Width - Zetor FORTERRA HD Series Operator's Manual

Machined area menu

Enter service menu by pressing (A) for a longer period of time. Select an item machined area marked with an
arrow (a) by (B) and (C) buttons. By pressing (A) button, you will enter the machined area (b) menu.
Machined area (b) menu:
(1) - setting the width of machined area (i.e. working width of tools)
(2) - start of machined area record
(3) - end of machined area record
(4) - erase recorded area from ECU
(5) - return to service menu

Machined area width

Enter machined area menu. Select the item aggregation width marked with an arrow (a) by (B) and (C)
buttons and by pressing the button (A) shift to the menu aggregation width. There are three preset values of
aggregation width in aggregation width menu. Select the required aggregation width by (B) and (C) buttons
and confirm by pressing (A) button. Select an item (1) by (B) and (C) buttons and press (A) button for return
to machined area (a) menu.
Setting aggregation width
In aggregation width menu, each of the three preset values of aggregation width can be changed.
Enter aggregation width menu, select the value (c) you want to change by (B) and (C) buttons.
After pressing the (D) button, the value (2) starts blinking, it can be changed by (B) and (C) buttons.
After you press the (D) button again, a value starts to blink (3), you can change the value by (B) and (C)
buttons.
After you press the (D) button again, a value starts to blink (4), you can change this value by (B) and (C)
buttons.
The newly set values will be saved by pressing the (A) button.
Then continue by changing each preset value or select return to the machined area (a).
ACQUAINTANCE WITH THE TRACTOR
FHD14N037
FHD14N066
40 40