Installing The Raid Controller Software; Cp 1616 Onboard - Siemens SIMATIC IPC647D Operating Instructions Manual

Device maintenance and repair
7.5 Installing the software
Procedure
1. If your device has no DVD drive, connect an external USB DVD drive to a USB port.
2. Insert the recovery DVD into the DVD drive.
3. Reboot the device.
4. Press the <Esc> key when the device boots and keep it pressed.
The BIOS selection menu is displayed when initialization is completed.
5. Click the "Boot Manager" button.
6. In the boot menu, select the optical drive using the cursor keys.
It is identified by a "P" in front of the SATA port number.
Example:
P5: DV-W28S-A
7. Follow the instructions on the screen.
Note
All existing data, programs, user settings, authorizations and license keys on the drives
are deleted.
7.5.7

Installing the RAID controller software

You install the software of the integrated RAID controller with its driver.
7.5.8

CP 1616 onboard

NDIS device driver
Read the information in the Device_driver_CP16xx.pdf document on the supplied
"Documentation and Drivers" DVD.
PROFINET IO
Read the information regarding the SIMATIC devices and SIMATIC NET documentation
listed in the "Connecting the device" section.
116
Operating Instructions, 01/2014, A5E32996306-AA
SIMATIC IPC647D