Installing Hardware Raid Controller Software - Siemens SIMATIC IPC1047 Operating Instructions Manual

Installing a language pack
The available language packs are described in section "Design of the device". Some
language packages can be found on the USB stick (Recovery) in the "Languagepacks"
folder.
Windows 7 and Windows Server 2008 R2:
1. Choose:
"Start > Control Panel > Clock, Language and Region > Regional and Language Options"
2. Select the "Keyboards and Languages" tab.
3. Click the "Install/uninstall languages" button and make the required changes.
Windows Server 2012 R2:
1. Right-click the start menu in the task bar and select "Command Promt (Admin)".
2. Enter the following command in the command line:
Dism /online /Add-Package /PackagePath:#Path to the language pack#
For "
Example:
Dism /online /Add-Package /PackagePath:E:\Languagepacks\ja-jp\lp.cab
7.6.7

Installing Hardware RAID controller software

Note
Observe the "General information on commissioning (Page 39)" in section "Commissioning
the device". Additional information is available in section "Installing drivers and software
(Page 92)".
SIMATIC IPC1047
Operating Instructions, 09/2018, A5E45118479-AA
#Path to language pack#
", enter the path to the language pack you want to install.
Device maintenance and repair
7.6 Installing the software
99