Permitted Mounting Positions - Siemens SIMATIC IPC647D Operating Instructions Manual

The data can be found as follows:
● Serial number: The serial number (S VP) is located on the rating plate either on the rear
● Order number of the device
● Device Ethernet address: The Ethernet address is printed on the device and is stored in
● Microsoft Windows "Product Key" on the "Certificate of Authenticity" (COA). The COA
Information on the device equipment is available on the inside of the front door.
3.1.3

Permitted mounting positions

Optional installation locations
The device can be mounted horizontally in control desks, switching cabinets and 19" rack
systems.
NOTICE
Operation in closed rooms
The device is approved for operation in closed rooms only. Pay attention to the ambient
and environmental conditions.
SIMATIC IPC647D
Operating Instructions, 01/2014, A5E32996306-AA
panel of the device or on the inside of the front door.
the BIOS Setup under "Main".
label is attached to the inside of the front door.
You may need the Product Key in case you reinstall the operating system.
Installing and connecting the device
3.1 Preparing for installation
31