Installing Raid Controller Software; Backing Up Data - Siemens SIMATIC IPC547E Operating Instructions Manual

Device maintenance and repair

7.6 Backing up data

Procedure
1. If your device has no DVD drive, connect an external USB DVD drive to a USB port.
2. Insert the recovery DVD into the DVD drive.
3. Reboot the device.
4. Press the <F12> key when the device boots and keep it pressed.
The "Boot-Menu" is displayed when initialization is completed.
5. In the boot menu, select the optical drive using the cursor keys.
It is identified by a "P" in front of the SATA port number.
Example:
P5: DV-W28S-A
6. Follow the instructions on the screen.
Note
All existing data, programs, user settings, authorizations and license keys on the drives
are deleted.
7.5.7

Installing RAID controller software

The onboard RAID controller is installed during the installation of its driver. You can find
additional information on this in the section "Installing drivers and software (Page 85)".
7.6 Backing up data
We recommend the software tool SIMATIC IPC Image & Partition Creator (as of V3.3.2) to
back up data under Windows operating systems. This tool provides convenient and efficient
functions for backing up and restoring the full content of memory cards, hard disk drives and
individual partitions (images).
SIMATIC IPC Image & Partition Creator supports the burning of DVD media only. You can
order the tool using the Siemens online ordering system
(http://www.siemens.com/automation/mall). For more information about
SIMATIC IPC Image & Partition Creator, refer to its product documentation.
92
Operating Instructions, 09/2013, A5E32317120-AA
SIMATIC IPC547E