Removing The Front Panel - Siemens SIMATIC IPC647D Operating Instructions Manual

Expanding and assigning parameters to the device

6.2 Removing the front panel

6.2 Removing the front panel
Requirement
● The device is fully disconnected from the power supply, see chapter "Switching off the
device (Page 51)".
Procedure
Observe the chapter "ESD guideline (Page 119)".
1. Open the front door at least 45°.
2. Remove the front panel.
62
The interlock marked in the figure
then releases the front panel.
To do so reach into the fan slots.
Operating Instructions, 01/2014, A5E32996306-AA
SIMATIC IPC647D