Installing The Raid Controller Driver; Installing The Raid Controller Software - Siemens SIMATIC Rack PC 840 V2 Operating Instructions Manual

Maintenance and service
11.2 Reinstalling the software
11.2.6

Installing the Raid Controller driver

The procedure for installing the RAID controller drivers can be found in the PROMISE user
manual on the supplied "Documentation and Drivers" CD.
Notes on Windows NT (only in connection with PATA-RAID Controller)
When you install Windows NT, select the WinNT Promise FastTrack 100 TX2/TX4 (tm)
Controller from the list.
ATAPI.SYS must be enabled when you reinstall Windows NT, in order
to enable CD-ROM/CD-RW operation.
To do so, change the start mode to restart in the Control Panel > Devices > ATAPI. Restart
the computer.
Notes on Windows 2000/XP
PATA-RAID Controller installieren
During the installation of Windows 2000 / XP, you need to select the Win2000 Promise
FastTrack 100 TX2/TX4 (tm) Controller or WinXP Promise FastTrack 100 TX2/TX4 (tm)
Controller from the list.
SATA-RAID Controller installieren
During the installation of Windows 2000 / XP, you need to select the Win2000 Promise
FastTrack TX 2300 Controller or WinXP Promise FastTrack TX2300 (tm) Controller from the
list.
11.2.7

Installing the RAID Controller software

The procedure for installing the software can be found in the PROMISE user manual on the
supplied "Documentation and Drivers" CD.
Notes on Windows NT (only in connection with PATA-RAID Controller)
When you install Windows NT, select FastTrak from the list.
ATAPI.SYS must be enabled when you reinstall Windows NT, in order
to enable CD-ROM/CD-RW operation.
To do so, change the start mode to restart in the Control Panel > Devices > ATAPI. Restart
the computer.
Notes on Windows 2000/XP
When you install Windows 2000/XP, select FastTrak from the list.
11-26
Operating Instructions, Edition 05/2006, A5E00248055-04
SIMATIC Rack PC 840 V2