Restoring The Delivery State - Siemens SIMATIC IPC647D Operating Instructions Manual

Changing the settings for language, region and formats of the system account and the
standard user account
You can change the settings for language, region and formats of the system account (for
example, the language in the user login dialog) and the settings of the standard user account
(standard setting for new users). The settings of the registered user are copied to the system
account and the standard user account for this purpose.
1. Choose: "Start > Control Panel > Clock, Language, and Region > Regional and
2. You can make the required changes in the "Administrative" tab. You copy the settings by
Installing language package
The available language packages are described in the chapter "Design of the device". Some
language packages are available on the Recovery DVD in the "Languagepacks" folder.
1. Choose:
2. Select the "Keyboards and Languages" tab.
3. Click the "Install/uninstall languages" button and make the required changes.
7.5.6

Restoring the delivery state

You can restore the original software using the Restore DVD. The DVD contains the
necessary images and tools for transferring the software to the hard disk drive or SSD of
your device.
The following options are available for restoring the delivery state:
● Restore the entire hard disk/SSD with drives C and D
● Restore drive C
Back-up authorization or license key
● Check whether you can back-up your authorization or license key from the drive and
● If backup is not possible, please contact Customer Support. There you can obtain
SIMATIC IPC647D
Operating Instructions, 01/2014, A5E32996306-AA
Language Options"
clicking the respective button.
"Start > Control Panel > Clock, Language, and Region > Regional and Language
Options"
This means data stored on drive D are retained.
perform this procedure if possible.
information necessary for corresponding software authorization.
NOTICE
Risk of data loss
If "Restore system partition only" is set all data on drive C: (system partition) will be
deleted. All data, user settings and all authorizations or license keys on drive C: are lost!
All data on drive C: will be completely deleted, reformatted and overwritten with the
original factory software.
If "Restore entire drive" is set ALL data, user settings, authorizations or license keys will
be lost on the entire drive.
Device maintenance and repair
7.5 Installing the software
115