Accessories - Siemens SIMATIC IPC647D Operating Instructions Manual

Overview

1.3 Accessories

1.3 Accessories
Accessories are available for your device. These are not included in the product package.
Information about the accessories that can be ordered is available in the following table and
on the Internet under the following address:
● IPC expansion components
automation/en/industrial-pc/expansion_components_accessories)
● Industry Mall (http://mall.automation.siemens.com)
Name Description
Retainer for locking The retainer is a mechanical safety device for the
the internal USB internal USB interface. It optimizes the protection of an
interface internal USB memory stick against loads caused by
vibration and shock during transportation or operation.
This device increases the reliability and operational
safety of the device.
Tray for low-profile The removable drive bay makes for quick and simple
removable drive bay replacement of a 3.5'' SATA hard disk without having to
open the device or remove it from the control cabinet.
The result is the following advantages for service and
maintenance, data backup and data transfer:
•
•
•
•
•
22
Replacement of a failed hard disk in operation ("Hot
Swap")
Downloading different system states or operating
systems from different hard drives during a short
period of time.
Simplified data backup by copying, for example, to a
backup hard drive.
Simple transportation of backup data
Separate data storage and archiving possible
(http://www.automation.siemens.com/mcms/pc-based-
Operating Instructions, 01/2014, A5E32996306-AA
Order Number and Figure
6ES7648-1AA00-0XK0
6ES7648-0EG00-1BA0
SIMATIC IPC647D