Interfaces - Siemens SIMATIC IPC647D Operating Instructions Manual

1.2.2

Interfaces

①
Connection for equipotential bonding
②
Fieldbus cover: No fieldbus, PROFIBUS or PROFINET
③
USB ports
Left sockets: Connection for USB 2.0 devices
Right sockets: Connection for USB 3.0 / USB 2.0 devices
USB 2.0 and USB 3.0 connections use different USB ports.
④
ETHERNET interfaces 1 and 2
LAN interfaces are numbered on the enclosure to provide unique
identification. The numbering by the operating system may deviate from this.
⑤
COM interface
⑥
DisplayPort port
⑦
PS/2 interface for keyboard
⑧
PS/2 interface for mouse
Depending on the ordered device configuration
1
SIMATIC IPC647D
Operating Instructions, 01/2014, A5E32996306-AA
1
1.2 Design of the device
Dual-head adapter
The adapter is necessary if
you want to connect one of
two monitors to the optional
Dual Head graphics card.
⑨
DVI-I port
⑩
Slot plate adapter with LPT and
COM2 port, optional
⑪
Audio input for analog audio
source or microphone, 3.5 mm
phono jack
⑫
Audio output for active speakers
or headset, 3.5 mm phono jack
⑬
Slots for expansion cards
(behind slot plate)
⑭
DMS59 connector
⑮
DVI-I connector
⑯
VGA adapter
Overview
17