Removing And Inserting The Tray From The Removable Drive Bays - Siemens SIMATIC IPC647D Operating Instructions Manual

6.6.4

Removing and inserting the tray from the removable drive bays

There are trays in the removable drive bays that are installed in the drive cages. Hard disks
or SSDs can be installed in the tray.
Requirement
● The front door is open
● 1 key
Procedure
Removal
1. Slide the cover of the locking mechanism of the removable drive bay in the direction of
2. Use the appropriate key to unlock the tray on the removable drive bay.
3. Open the handle on the removable drive bay and open it at the highlighted spot in
4. Now grasp the handle to the right of the notch you used to pull out the handle and pull the
SIMATIC IPC647D
Operating Instructions, 01/2014, A5E32996306-AA
the arrow.
direction of the arrow until you feel a slight resistance.
tray completely out of the removable drive bay.
Expanding and assigning parameters to the device
6.6 Drives and storage media
77