Automatic Switching On Of The Device; Windows Action Center - Siemens SIMATIC IPC647D Operating Instructions Manual

4.3

Automatic switching on of the device

You can specify "Power Failure Recovery" in the BIOS Setup entry so that the device
automatically starts up again after a separation from the mains voltage for more than 20
seconds.
Automatic startup may endanger the operation of the machine or plant, for example, after a
power failure.
Take the BIOS Setup entry "Power Failure Recovery" into consideration in the plant
planning.
4.4

Windows Action Center

Warning from the Windows Security Center
A warning from the Windows Security Center is displayed the first time you switch on your
device. The Security Center checks the status of the device in regard to the three important
security aspects listed below. If a problem is detected (an outdated antivirus program, for
example), the Security Center issues a warning and makes recommendations on how you
can better protect the device.
● Firewall: The Windows Firewall adds protection to the device by blocking network or
● Antivirus software: Antivirus programs add protection to the device by searching for and
● Automatic updates: Using the Automatic Update feature allows Windows to regularly
● Real-time protection (Windows 7 only): Windows Defender displays warnings if spyware
Configure the Security Center according to your requirements.
SIMATIC IPC647D
Operating Instructions, 01/2014, A5E32996306-AA
Internet access to the device by unauthorized users. Windows checks if the device is
protected by a software firewall.
The firewall is enabled by default in the delivery state.
eliminating viruses and other security threats. Windows checks if a full-range, up-to-date
antivirus program is running on the device.
No antivirus software is installed in the delivery state.
search for the latest critical updates for the device and to install them automatically. This
feature is disabled in the delivery state.
or possibly unwanted software is installed or executed on the computer. You will also
receive a warning if programs attempt to modify important Windows settings.
Commissioning the device
4.3 Automatic switching on of the device
47