Installing Drivers And Software - Siemens SIMATIC IPC647D Operating Instructions Manual

Device maintenance and repair
7.5 Installing the software
7.5.3

Installing drivers and software

Requirement
You need the "Documentation and Drivers" DVD included in the scope of delivery to install
Windows drivers.
Procedure
Installing drivers
1. If your device has no DVD drive, connect an external USB DVD drive to a USB port.
2. Insert the supplied "Documentation and Drivers" DVD.
3. Start the "Start" program.
4. Select "Drivers" from the index.
5. Select the device and operating system.
6. Select the required driver.
7. Open the folder with the driver data by clicking on the link next to "Driverpath".
8. Start the setup program in this folder.
Note
The driver for the chipset has to be installed before all other drivers with a new installation
of Windows Server 2008 R2 or Windows 7. Then you can install the drivers for all other
devices.
Installing the software
● You can find information about installing SIMATIC software packages in the
corresponding documentation.
● You can obtain information about driver updates and installing application programs from
the respective manufacturers.
110
Operating Instructions, 01/2014, A5E32996306-AA
SIMATIC IPC647D