Installing/Mounting - Siemens SIMATIC RF600 System Manual

Hide thumbs Also See for SIMATIC RF600:

Table of Contents

5.3 SIMATIC RF615R

Installing/mounting

Close unused connectors

Note that the readers only have the specified degree of protection when all connectors are

in use or when unused connectors are closed with the protective caps.

Emitted radiation

The transmitter complies with the requirements of Health Canada and the FCC limit values

for subjecting persons to HF radiation, provided that a minimum spacing of 26 cm exists

between antenna and person. When the antennas are installed, you must therefore ensure

that a minimum spacing of 26 cm is maintained between personnel and antennas.

Mounting/installing the device

You can mount the reader in the following ways:

● directly on a flat surface using the VESA 100 mounting system (torque ≃ 1.5 Nm).

The positions of the mounting holes for the device are shown in the section Dimension

drawing (Page 141).

System Manual, 06/2019, J31069-D0171-U001-A22-7618

SIMATIC RF600