Installing And Commissioning - Siemens SIMATIC RF1060R Operating Instructions Manual

Installing and commissioning

Proceed as follows to install and commission the SIMATIC RF1060R reader:
1. Connect the RF1060R reader to your PC using the USB cable.
Reaction: The message "A USB device was installed successfully" appears.
2. Install DLL drivers and the demo application on your PC using the installation file
"RF1060R.exe".
You will find the file on the Internet on the pages of the Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/view/109741590).
3. Start the demo application by double-clicking on the file "AccessControlDemo.exe".
You will find more information on the demo application in the section "The demo application
(Page 20)".
SIMATIC RF1060R
Operating Instructions, 05/2017, C79000-G8976-C432-02
3
9