Configuring; Downloading Data; Bitmapped File Downloading - Arbiter Systems Portable Power Sentinel 933A Operation Manual

2.5.3 Configuring
Configure all SETUP functions through PSCSV or through the front panel
keys.
2.5.4

Downloading Data

When downloading data, all of the data is in binary format and can be
located in the directory of your choice on the computer running PSCSV.
2.6

Bitmapped File Downloading

Purpose
The PRINT key has one basic function: to send a bitmapped file of
the current display to the RS-232C port.
Procedure
1. Verify the RS-232 settings by selecting DISPLAY > 9- Config &
Status. If you need to change the SERIAL settings, then you would
press the SETUP key and 2- Serial Setup. Adjust the settings and
go to step 2.
2. Open a terminal program of choice and make sure that the port
settings agree with those from step 1 above.
necessary.
3. Set the 933A to read the desired information on the display.
4. Set the terminal program to Transfer the file via Xmodem Receive.
This is done with slight differences between programs.
5. When requested, give the file a name with a "bmp" extension, click
OK and (when ready) press the PRINT key on the 933A.
6. Within a few seconds the file should transfer. You should see a
number of bytes received. Generally about 9 kB. This time interval
can vary between terminal programs and baud rates.
Change them if
30