Basic Operation; Introduction; Powering The Model 933A; Operation With The Ac Power Cord - Arbiter Systems Portable Power Sentinel 933A Operation Manual

Chapter 2

Basic Operation

2.1

Introduction

"Basic Operation" describes all of the 933A keys, connectors and menus,
and how to operate the Model 933A primarily from the front panel buttons.
You may also remotely control the 933A from a computer running PSCSV
application software. Additional information on PSCSV software is located
throughout the manual where needed and in Chapter 6, entitled, "PSCSV
Basics."
2.2

Powering the Model 933A

2.2.1

Operation with the AC Power Cord

The Model 933A can be operated from an AC outlet or from an internal
rechargeable battery pack. To operate with the AC power cord.
1. Plug the power cord into the AC outlet (see External Power, under
Specifications).
2. Connect the power cord to the 933A.
3. Press the ON/OFF key to turn on the 933A and the splash screen
will appear on the display.
4. Following the splash screen, the 933A will settle on the DISPLAY
SELECTION screen for viewing measurements.
14