Module Overview - Festo CPX-FB33 Manual

2. Commissioning

2.1.2 Module overview

Module (order code)
FB33:
Bus node for PROFINET IO,
2 x M12 socket, metal version
FB34:
Bus node for PROFINET IO,
2 x RJ45 socket, metal version
Digital 4−input module
(F: CPX−4DE)
Digital 8−input module
(I: CPX−8DE)
Digital 8−input module with
channel diagnostics
(I: CPX−8DE−D)
Digital 16−input module
(I: CPX−16DE)
Digital 16−input module with
channel diagnostics
(I: CPX−16DE−D)
2−4
Electric modules
Each module, including the bus node, has its own identifier,
the so−called module identifier. Apply the module identifiers
from left to right corresponding to the physical order as in
stalled in the CPX terminal in your configuration program
(e. g. Siemens STEP 7, see section 2.1.4).
In graphical configuration programs, the module identifiers
are typically found in a separate listing of all available hard
ware modules or field devices, e. g. in a module directory or
module catalogue.
Module identifier
FB33−RIO PROFINET IO
FB33 PNIO Module
FB33 PNIO Module [Status]
FB33 PNIO Module [STI]
FB34−RIO PROFINET IO
FB34 PNIO Module
FB34 PNIO Module [Status]
FB34 PNIO Module [STI]
4DI
8DI
8DI−D
16DI
16DI−D
1)
Occupied IO bytes
FB33/34 in the operating mode
2)
Remote I/O
without diagnostics access:
0 Byte
with status bits [Status]:
1 Byte IO
with IO diagnostic interface
[System Table Interface, STI]:
2 bytes I, 2 bytes O
1 byte I
1 byte I
1 byte I
2 byte I
2 byte I
Festo P.BE−CPX−PN IO−EN en 0710NH
: