Festo CPX-FB33 Manual page 9

Contents and general instructions
Festo P.BE−CPX−PN IO−EN en 0710NH
This manual contains specific information about installing,
configuring, parameterising, commissioning, programming
and diagnosing the CPX bus node for PROFINET.
Further information about PROFINET can be obtained on the
World Wide Web at
www.profinet.com
Also observe the following PROFINET−specific document:
PROFINET Installation Guide
General basic information about the method of operation,
fitting, installing and commissioning CPX terminals can be
found in the CPX system manual.
Information about further CPX modules can be found in the
manual for the relevant module.
Product specific information about the control system
(IPC, SPS, PLC or I/O controller) can be found in the
manufacturer's product documentation.
VII