Festo CPX-FB33 Manual page 95

3. Diagnosis
Value Fault type (standard)
0 reserved
1 Short circuit
2 Undervoltage
3 Overvoltage
4 overload
5 Overheating
6 Cable break
7 Upper limit value exceeded
8 Lower limit value exceeded
9 reserved
10 reserved
11 reserved
12 reserved
13 reserved
14 reserved
15 reserved
bold = relevant for CPX−FB33/FB34
Tab. 3/8: Error types for the diagnostics via PROFINET
Festo P.BE−CPX−PN IO−EN en 0710NH
Fault types
The following table shows a list of all error types which
provided further diagnostics information. The sections 3.5.2
and 3.5.3 describe the access to these error types (based on
Siemens STEP 7).
Value Error type (CPX−specific)
1016 Incorrect valve setting
1017 Valve: Switching counter, limit value exceeded
1018 reserved
1019 reserved
1020 Parameterisation errors (configurable)
1021 Parameterisation errors (data format)
1022 Parameterisation errors (linear scaling)
1023 Parameterisation error (digital filter)
1024 Parameterisation error (lower limit value)
1025 Parameterisation error (upper limit value)
1026 Defective actuator supply
1027 CP module failure
1028 Defective CP configuration
1029 Short circuit in the CP string (CP line)
1030 Slave has no bus connection
1031 Channel failed
3−15