Front Door - Jr41; Instrument Panel; Instrument Panel Speaker; Rear Speaker - Jr41 - Chrysler Sebring 2004 Service Manual

8A - 12 AUDIO/VIDEO
SPEAKER (Continued)
REMOVAL

FRONT DOOR - JR41

(1) Disconnect and isolate the battery negative
cable.
(2) Remove door trim panel (Refer to 23 - BODY/
DOOR - FRONT/TRIM PANEL - REMOVAL).
(3) Remove speaker screws.
Fig. 9 DOOR SPEAKER - JR41
(4) Disconnect wire
speaker.
(5) Remove speaker from door (Fig. 9).
FRONT DOOR - JR27
(1) Disconnect and isolate the battery negative
cable.
(2) Using a trim stick, pry speaker grill from door
trim panel (Fig. 10).
Fig. 10 DOOR SPEAKER - JR27
(3) Remove the speaker mounting fasteners.
(4) Remove speaker from door trim panel.
(5) Disconnect wire
speaker.
harness connector
harness connector

INSTRUMENT PANEL

(1) Disconnect and isolate battery negative cable.
(2) Remove A-pillar trim.
Fig. 11 INSTRUMENT PANEL SPEAKER

1 - INSTRUMENT PANEL SPEAKER

2 - ELECTRICAL HARNESS CONNECTOR
(3) Remove instrument panel top pad (Refer to 23 -
BODY/INSTRUMENT
PANEL TOP PAD - REMOVAL).
from
(4) Remove speaker screws.
(5) Disconnect
speaker.
(6) Remove speaker (Fig. 11).

REAR SPEAKER - JR41

(1) Disconnect and isolate the battery negative
cable.
(2) Fold down the rear seat backs.
(3) Remove C-pillar trim.
(4) Remove lower quarter trim behind rear seat
backs.
(5) Remove fasteners from rear shelf trim. Pull out
trim to access speaker.
(6) Remove speaker screws.
(7) Disconnect wire harness connector.
(8) Remove speaker (Fig. 12).
REAR SPEAKER - JR27
(1) Disconnect and isolate the battery negative
cable.
(2) Using a trim stick, pry the speaker grill from
the trim panel.
(3) Remove speaker mounting screws (Fig. 13).
(4) Remove speaker from trim panel.
(5) Disconnect
speaker.
from
PANEL/INSTRUMENT
wire harness connector
wire harness connector
JR
from
from