Table of Contents
Advertisement
JR
KNUCKLE (Continued)
Fig. 1 Rear Wheel Speed Cable Routing And
Attachment
1 - UPPER CONTROL ARM
2 - SHOCK ABSORBER
3 - SPEED SENSOR CABLE ROUTING CLIPS
4 - BOLT
5 - SPEED SENSOR CABLE
6 - BRAKE FLEX HOSE BRACKET
7 - BOLT
8 - BRAKES
(4) If equipped with ABS, remove wheel speed sen-
sor head mounting bolt (Fig. 10).
(5) If equipped with rear drum brakes, remove
brake drum. (Refer to 5 - BRAKES/HYDRAULIC/
MECHANICAL/DRUM - REMOVAL)
(6) If equipped with rear disc brakes, remove cali-
per and rotor. (Refer to 5 - BRAKES/HYDRAULIC/
MECHANICAL/BRAKE PADS/SHOES - REMOVAL)
(7) Remove rear hub and bearing assembly retain-
ing nut and washer (Fig. 2), then remove hub and
bearing assembly.
Fig. 2 Hub/Bearing Assembly Retaining Nut
1 - RETAINING NUT
2 - SPINDLE
3 - HUB/BEARING ASSEMBLY
(8) If equipped with rear drum brakes, remove
parking brake cable from parking brake actuating
lever, then remove cable from drum brake support
plate. (Refer to 5 - BRAKES/PARKING BRAKE/CA-
BLES - REMOVAL)
(9) Remove four bolts attaching drum brake sup-
port plate/disc brake adapter to knuckle (Fig. 3).
Fig. 3 Rear Brake Support Plate Mounting Bolts
1 - REAR BRAKE SUPPORT PLATE
2 - REAR KNUCKLE
3 - BRAKE SUPPORT PLATE ATTACHING BOLTS
(10) Remove drum brake support plate, brake
shoes
and
wheel
cylinder
adapter from knuckle. It is not necessary to
remove brake flex hose from drum brake wheel
cylinder when removing support plate. Once
drum brake assembly is removed, hang plate from
rear shock assembly using mechanics wire as shown
(Fig. 4). Do not allow drum brake assembly to hang
by flex hose.
Fig. 4 Correctly Stored Rear Brake Support Plate
1 - WIRE HANGER
2 - REAR SHOCK ABSORBER ASSEMBLY
3 - REAR BRAKE SUPPORT PLATE
REAR SUSPENSION
assembly/disc
2 - 35
brake
Advertisement
Table of Contents
