Table of Contents
Advertisement
8L - 14
LAMPS/LIGHTING - EXTERIOR
FRONT POSITION LAMP - EXPORT (Continued)
Fig. 13 FRONT POSITION LAMP LOCATION
1 - HEADLAMP
2 - PARK, TURN SIGNAL LAMP
3 - FRONT POSITION LAMP
Fig. 14 FRONT POSITION LAMP
1 - HEADLAMP
2 - HEADLAMP UNIT
3 - FRONT POSITION LAMP SOCKET
4 - FRONT POSITION LAMP
INSTALLATION
(1) Insert bulb to socket.
(2) Install front position lamp socket to headlamp
unit.
(3) Place rubber boot into position.
(4) Install headlamp unit (Refer to 8 - ELECTRI-
CAL/LAMPS/LIGHTING - EXTERIOR/HEADLAMP
UNIT - INSTALLATION).
(5) Connect battery negative cable.
HAZARD WARNING SWITCH
DESCRIPTION
Fig. 15 HAZARD WARNING SWITCH
1 - MULTI-FUNCTION SWITCH CONNECTOR
2 - HAZARD WARNING SWITCH
3 - FLASHER AND WINDSHIELD WIPER/WASHER SWITCH
CONNECTOR
4 - MOUNTING SCREWS
5 - COMBINATION FLASHER
The hazard warning switch push button protrudes
from the top of the steering column (Fig. 15). The
hazard warning switch push button is identified with
a double triangle, which is the international control
symbol for hazard warning.
OPERATION
The hazard warning system is actuated by a push
button located on the top of the steering column
between the steering wheel and the instrument
panel. The hazard switch is identified with a double
triangle on top of the button. Push and release the
button to turn the hazard function ON or OFF. The
button will move out from the steering column in the
ON position and will remain in toward the column in
the OFF position.
JR
Advertisement
Table of Contents
