Table of Contents
Advertisement
JR
OIL (Continued)
1 - COOLANT RECOVERY CONTAINER
2 - COOLANT PRESSURE CAP
Fig. 82 Oil Level
1 - ENGINE OIL LEVEL DIPSTICK
(4) Place a suitable drain pan under crankcase
drain.
(5) Remove drain plug from crankcase and allow
oil to drain into pan. Inspect drain plug threads for
stretching or other damage. Replace drain plug and
gasket if damaged.
(6) Remove oil filter. (Refer to 9 - ENGINE/LUBRI-
CATION/OIL FILTER - REMOVAL)
Fig. 81 Fluid Level Check - 2.0/2.4L
3 - ENGINE OIL FILL
4 - ENGINE OIL DIPSTICK
(7) Install and tighten drain plug in crankcase.
(8) Install new oil filter. (Refer to 9 - ENGINE/LU-
BRICATION/OIL FILTER - INSTALLATION)
(9) Lower vehicle and fill crankcase with specified
type and amount of engine oil. (Refer to LUBRICA-
TION
DESCRIPTION)
(10) Install oil fill cap.
(11) Start engine and inspect for leaks.
(12) Stop engine and inspect oil level.
NOTE: Care should be exercised when disposing
used engine oil after it has been drained from a
vehicle engine. Refer to the WARNING listed above.
ENGINE 2.0L DOHC
&
MAINTENANCE/FLUID
9 - 55
TYPES
-
Advertisement
Table of Contents
