GE Mini COM Express 10 Hardware Reference Manual page 76

76
For public disclosure
RTC Battery-backed circuit in PC-AT systems that keeps system time and date as well
as certain system setup parameter
SDVO Intel-defined format for digital video output used with carrier board conversion
ICs to create parallel, TMDS, and LVDS flat panel formats, as well as NTSC and PAL TV
outputs
SPD Serial EEPROM associated with a bank of memory that contains the
characteristics and operating parameters of the memory
SPI A four-wire (clock, data in, data out, and chip select) bus typically used for
low-speed non-volatile memories. Standard for a synchronous serial data bus with
Master-Slave devices.
TAP JTAG boundary scan control port
UDIMM Memory module where the address and control bus is directly connected to the
memory controller
Mini COM Express Type 10 Module mCOM10-L1500