Watchdog Timer Configuration Registers; Watchdog Timer Control; Watchdog Timer Base Address - GE Mini COM Express 10 Hardware Reference Manual

6.6 Watchdog Timer Configuration Registers

Index
0x30
0x60
0x61
0x70
0xF0
Bit
7:01
0
Watchdog Timer Base Address Register (LDN 0x14, Index 0x60-0x61)
Bit
15:03
2:0
54 GFK-2896
For public disclosure
Watchdog Timer Configuration Registers
Name
Logical device activation control
Control
Watchdog registers base I/O address (upper 8
Wdog Base (High)
bits)
Watchdog registers base I/O address (lower 8
Wdog Base (Low)
bits)
Wdog IRQ Watchdog interrupt request assignment
Wdog Options Watchdog timer options settings

6.6.1 Watchdog Timer Control

The Watchdog Timer Control register allows the logical device to be activated or
deactivated.
Watchdog Timer Control Register (LDN 0x14, Index 0x30)
Name Access
—
R
ACTIVATE R/W

6.6.2 Watchdog Timer Base Address

The Watchdog Timer Base Address register sets the I/O base addresses for the FFC
watchdog timer run-time registers. The base address must be aligned on an 8-byte
boundary.
Name Access
ADDR[15:3]
R/W
— R
Description
Description
Default
0b0000000 Reserved
Logical device activation
0
0: Disabled
1: Enabled
Description
Default
0x000 Base address bits 15:03
0b000 Reserved
Mini COM Express Type 10 Module mCOM10-L1500