1.1 Features
12
GFK-2896
For public disclosure
The mCOM10-L1500 provides the following core hardware and firmware features:
•
AMD G-Series SoC, including:
−
Two or four CPU cores
−
GPU core
−
Northbridge
−
DDR3 memory controller
−
Integrated display output
−
I/O controller
−
Dual-core 9W TDP and quad-core 15W TDP SKUs available
•
Single-channel 72-bit DDR3L SDRAM with ECC support: 2 GB, 4 GB, and 8 GB
options
•
Gigabit Ethernet interface
•
Four PCIe lanes, configurable as either 4×1 or 1×4
•
Eight MB SPI Flash for UEFI/BIOS firmware
•
Two SATA ports
•
Eight USB 2.0 host interfaces, two of which also support USB 3.0 SuperSpeed
•
Two simultaneous display outputs: LVDS/eDP (configurable), and DDI
•
LPC Bus
•
One internal plus one external SPI bus
•
SMBus
2
•
I
C bus
•
SDIO or GPIO (configurable)
•
High-definition Audio
•
Two 16550-compatible serial ports
•
Express Card support
•
Power and system management
•
Thermal protection
•
4.75 – 20 V primary power, 5 V Standby, and 3 V RTC power supply input
Mini COM Express Type 10 Module mCOM10-L1500
Need help?
Do you have a question about the Mini COM Express 10 and is the answer not in the manual?
Questions and answers