(3) CIRCUIT DESCRIPTION
Below table shows the major differences compared to the previous vehicle model before year
2004. For whole functions and details, refer to corresponding section.
A. TRANSMITTER CODING
-
Remove the ignition key from key hole.
-
Connect the No. 3 terminal (REKES coding) and No. 16 terminal (battery+) on the
diagnosis connector with a jumper cable.
-
Press any button on the remote control key shortly. (approx. 0.5 sec.)
-
hen the coding is successful, turn signal lamps blink once and warning horn sounds
once.
-
If the coding has failed, repeat 1 to 4 steps.
B. CONNECTOR ARRANGEMENT (UNIT)
0-53
8710-03
CIRCUIT
RODIUS 2004.09