SSANGYONG RODIUS 2004.09 Manual page 336

03-34
8710-01
(2) Receiver
1. Operating requirements
- IGN key = OUT (removed)
2. Code registration requirement
- After connecting the B+ to external coding terminal (applying battery voltage)
(3) Transmitter Code Registration
- Only one transmitter code can be registered.
- The received code cannot be output during the registration.
1.
Coding terminal: OFF a ON (applying battery voltage)
2. Press LOCK, UNLOCK or PANIC switch on the transmitter.
3. Outputs hazard warning flasher for 0.5 seconds (once) and horn for 0.04 seconds (once)
during registration.
4. Code output requirements
- The system outputs the function code when the CUSTOM and ID code are correct and the
Rolling code is within operating range while the ignition key is removed and the coding
terminal is turned off (grounded).
- Available function code: LOCK / UNLOCK / PANIC
STICS
RODIUS 2004.09