SSANGYONG RODIUS 2004.09 Manual page 234

07-6
2112-01
3. FUNCTION DESCRIPTION OF COOLING SYSTEM
1. Cylinder head coolant outlet port is integrated into intake manifold. (in front of cylinder #1)
: Improved shape and gasket material to prevent coolant from leaking
Cylinder head
2. In OM 600 engine, coolant inflows through the heater line rear section (cylinder #4 and #5)
of cylinder head.
However, in D27DT engine, coolant inflows from cylinder block through oil cooler (refer to
coolant flows layout in previous page).
: It prevents cooling efficiency from decreasing due to coolant separation between cylinder
#4 and #5.
3. In OM 600 engine, the cooling fan is installed with water pump, however, in case of D27DT
engine, it is connected to water pump with an additional pulley.
ENGINE COOLING SYSTEM
RODIUS 2004.09
Intake manifold
Coolant outlet
port