SSANGYONG RODIUS 2004.09 Manual page 433

PROPELLER SHAFT
1. PROPELLER SHAFT GENERAL INFOROMATION
2. SPECIFICATION
The propeller shaft transfers the power
through the transmission and transfer case
to the front/rear axle differential carrier (final
reduction gear). It is manufactured by a thin
rounded steel pipe to have the strong
resisting force against the torsion
and bending.
Both ends of propeller shaft are connected
to the spider and the center of propeller
shaft is connected
accommodate the changes of the height and
length. The rubber bushing that covers the
intermediate bearing keeps the balance of
rear propeller shaft and absorbs its vibration.
06-3
0000-00
3310-01
to the spline to
PROPELLER SHAFT
RODIUS 2004.09