SSANGYONG RODIUS 2004.09 Manual page 317

(1)
Wiper MIST and washer coupled wiper
1) When turning on the washer switch while the wiper relay is operating.
- If the wiper relay "ON" request time is shorter than the remained "ON" time, it is
disregarded.
(2)
Speed sensitive INT (intermittent) wiper
1) The wiper relay continues to output for remaining "ON" time even when the INT
switch is
turned off.
2) IGN 2 switch "ON", INT switch "OFF": resume the intermittent time when turning
(3)
"ON"
3) IGN 2 switch "OFF", INT switch "ON": resume the intermittent time when turning
"ON"
Controls when the wiper motor parking is defective
- The wiper relay continues to output when the parking terminal is fixed at the ground or
IGN
while the wiper relay is "ON" (INT switch = ON or Washer switch = ON) (The output
stops
03-15
8710-01
STICS
RODIUS 2004.09