SSANGYONG RODIUS 2004.09 Manual page 59

3) CIRCUIT DESCRIPTION
▶TRANSMITTER CODING
- Remove the ignition key from key hole.
- Connect the No. 3 terminal (REKES coding) and No. 16 terminal (battery+) on the
- diagnosis connector with a jumper cable.
- Press any button on the remote control key shortly. (approx. 0.5 sec.)
When the coding is successful, turn signal lamps blink once and warning horn sounds
- once.
If the coding has failed, repeat 1 to 4 steps.
0-15
8210-01
CIRCUIT
RODIUS 2004.09