01-16
0000-00
2) AQS Operation
The AQS operates under air conditioner AUTO mode or when the AQS switch is pressed under
manual mode. It requires preheating time (for seconds) for operation and the module and
sensor are integrated.
(However, it operates only when the DEF (defroster) switch on the air conditioner switch panel
is not pressed in.)
1. Self diagnosis and preheating process during initial operation of A/C controller (AUTO mode)
If the AQS switch is pressed in, the AQS function works regardless of air conditioner
controller operation.
AIR CONDITIONING SYSTEM
RODIUS 2004.09
1.
When the air conditioner controller is
operated in AUTO mode during its initial
operation, the air source is changed
to the recirculation mode and AQS LED
comes on.
(This is the self diagnosis and preheating
process for AQS.)
2.
After completing the above process, the
AQS LED is turned off and the air source
is automatically changed to the fresh air
mode.