SSANGYONG RODIUS 2004.09 Manual page 525

4. AIR QUALITY SYSTEM (AQS)
1) Components of AQS
Air Quality System (AQS) changes the air source selection to recirculation mode when polluted
air is detected through AQS sensor. The air source selection returns back to fresh air intake
mode after a specified period or the polluted air is disappeared.
AQS and air source selection switch
The AQS switch is integrated with the air source selection switch.
The figure shows that the mode has been changed to the recirculation mode from fresh air
mode under AQS mode (AQS LED ON) after detecting the polluted outside air.
AQS sensor and ambient temperature
sensor
AUTO Mode
The air source is not changed when pressing the AQS
and air source selection switch in "AUTO"
However, the indicator on the switch turned ON/OFF. In
other words, the air source cannot be changed to
recirculation mode in AUTO mode by just pressing the
switch.
To change the air source to recirculation mode in AUTO
mode, get into Manual mode first, then press the air
source selection switch.
Manual Mode
To change the AQS mode to Manual mode from AUTO
mode, use the MODE switch or the fan speed control dial.
In Manual mode, the "AUTO" symbol on the display is
disappeared. When pressing the AQS and air source
selection switch, the mode is changed in order of AQS
LED ON, AQS LED OFF (fresh air), and air source LED
ON (recirculation).
01-15
0000-00
AQS sensor
Ambient temperature sensor
Connector
mode.
AIR CONDITIONING SYSTEM
RODIUS 2004.09