SSANGYONG RODIUS 2004.09 Manual page 80

0-36 8610-04
▷Turning Calibration
This operation is needed to calibrate the indication tolerance between the actual
direction and the indicated direction at current vehicle location.
- Turning calibration conditions
· when the multi-meter is installed in the vehicle.
· when the battery is replaced.
- Turning calibration procedure
· When pressing the MODE and UP button simultaneously for more than 1 second,
the current direction flashes.
· Turn the vehicle over 1 complete circle within 128 seconds slowly, then the
calibration will be accomplished.
When the calibration is finished, the vehicle's
·
The turning calibration process is automatically canceled if the vehicle is not turned
within 120 seconds after calibration mode started.
▶Altimeter
▷Absolute Altimeter
0 m above the sea level is equivalent to 1013.25 hpa and the altimeter convert the
difference between this pressure and atmospheric pressure to absolute altitude. Its
Indication range is -200 m to 2,800 m.
- How to calibrate the absolute altitude
UP button
·
Press briefly (below 0.5 seconds): increases by 20 m
Press and hold (over 0.5 seconds): continues to increase by 20 m with the interval
of 0.2 seconds
· DOWN button
Press briefly (below 0.5 seconds): decreases by 20 m
Press and hold (over 0.5 seconds): continues to decrease by 20 m with the interval
of 0.2 seconds
- How to erase the calibrated altitude value
Press the UP and DOWN buttons simultaneously for more than 1 second to cancel the
altitude calibration.
- Altitude calibration range
It can be calibrated by 300 m within the range of 0 to 2,800 m.
CIRCUIT
RODIUS 2004.09
new direction will be indicated.
▷Relative Altimeter
It indicates the specific area's relative altitude based on the current altitude of the
vehicle (current altitude is indicated to 0 m).
- Changing to relative altimeter mode
The mode is switched between the relative altimeter mode and absolute altimeter
mode when pressing the MODE button over 1 second in direction/atmospheric
pressure/altitude mode.
▶Barometer
It indicates the current atmospheric pressure in range from 720 hpa to 1045 hpa by 1 hpa.
D. SPEED SENSING INDICATOR
The flashing interval of the road signs changes gradually according to the vehicle speed.
▶Flashing interval according to the vehicle speed
E. DRIVING TIME
- It indicates the driving time from start up to now.
- It can be reset to 0 when turning the ignition key to "OFF"
or DOWN button for a specific period of time.
- Indication range: 0:00 ~ 23:59
position or pressing UP