SSANGYONG RODIUS 2004.09 Manual page 348

04-10
8010-01
3) Fuel Level Gauge
The fuel level gauge displays the resistance value of the float on the fuel sender in the fuel tank
through a pointer.
Note that this vehicle doesn't have a service hole for checking the fuel sender connector
in the fuel tank.
The fuel sender and its connector can be checked and replaced only when the fuel tank is
removed.
The power supply and resistance value should be measured at the connector in front of the fuel
sender (refer to wiring diagram).
When the power supply and output resistance are normal, the float operation by fuel level may
be defective; if so, replace the fuel sender.
▶Tolerance and resistance value by indicating angle
This table shows the tolerance and resistance value changes by fuel level in normal conditions.
Therefore, the differences that can be occurred by the road conditions and fuel fluctuations are
ignored.
CLUSTER
RODIUS 2004.09