SSANGYONG RODIUS 2004.09 Manual page 124

0-80 8910-01
D. OPERATIONAL PRINCIPLE OF REARVIEW CAMERA
In the rearview camera equipped vehicle, the monitors display when selecting "R"
position for safe parking. The operating conditions are as below:
▶General
When selecting R position while A/V system is in use:
· The video mode in front A/V system is changed to rearview monitoring mode.
However, the audio mode stays on.
· The video mode in front A/V system resumes when shifting out from "R"
· position.
The audio and video mode in rear A/V system are not changed.
· When selecting R position while A/V system is not in use:
Both monitors are automatically turned on to display rearview.
·
Both monitors are automatically turned off when shifting out from "R"
▶Operating Conditions and Modes of Rearview Camera
The rearview camera cannot operate alone. If the gear selector lever stays in "R"
position more than 3 seconds with the ignition key "ON"
rearview appears on the monitors automatically regardless of displays by head unit.
▶Auto mode
Automatic operating mode
▷ When selecting R position while A/V system is not in use (Ignition switch "ON",
engine running):
Both monitors are automatically turned on to display rearview.
·
· Both monitors are automatically turned off when shifting out from "R" position.
▷ When selecting R position while A/V system is in use (Ignition switch "ON",
engine running):
· The video mode in front A/V system is changed to rearview monitoring mode.
However, the audio mode stays on.
· The video mode in front A/V system resumes when shifting out from "R"
· position.
The audio and video mode in rear A/V system are not changed.
CIRCUIT
RODIUS 2004.09
E. REARVIEW CAMERA OPERATION
The reverse signal works as an operation signal for rearview camera. If it receives reverse
signal, the rearview camera is turned on even though the AV unit is turned off.
The rearview camera consists of AV unit (including monitor), reverse signal, battery voltage
and rearview camera.
The AV unit receives the power from battery and if it receives the reverse signal, supplies the
power to rearview camera. When the rearview camera operates, it transmits color video
signal to the A/V unit then the rearview is displayed on the monitor.
position.
or engine running, the