SSANGYONG RODIUS 2004.09 Manual page 380

09-6
0000-00
Multi-meter
Even in other modes, it is
changed to the parking aid
screen when moving the gear
selector lever into
position.
Parking aid sensor
(Rear bumper)
The three parking aid sensors
send the distance
between rear bumper and
obstacle to PAS unit.
Gear selector lever
(R position)
Applies power to parking aid
system.
PAS
RODIUS 2004.09
Front monitor
When moving
selector lever
position while watching DVD
"R" or VCD, the rearview appears
on the front monitor.
PAS unit
It is a control unit for the
data parking aid system (PAS) and
transmits the signals from
sensors to multimeter and
buzzer. (installed
tuner/amplifier bracket)
the gear When
into selector
"R"
position, the alarm buzzer in
ICM box sounds (installed at
bottom of STICS).
Rearview camera
The rearview camera sends
the rearview to the monitor by
using wide angle lens.
in
ICM box
moving the gear
lever into
"R"