SSANGYONG RODIUS 2004.09 Manual page 118

0-74 8610-01
3) CIRCUIT DESCRIPTION
(1) ROOM LAMP CONTROL
A. Front Room Lamp
- The front room lamp comes on when opening the driver's
door while the front room lamp switch is at door coupled position and the key reminder
switch is turned off.
- The room lamp stays on for 2 seconds (T1) and then decays through 3 seconds (T2)
when closing the driver'sdoor or passenger's door.
- The room lamp output should stop immediately after turning on the ignition key during
decaying operation.
- The front room lamp comes on for 30 seconds (T3) when receiving the unlock signal
from the remote control key while the door is closed.
- The front room lamp output period is extended by 30 seconds (T3) when receiving the
unlock signal from the remote control key again during output.
- When a door is opened during its extended period, the lamp stays on. If closed,
operates as in step 2.
- The room lamp output stops immediately after receiving the lock signal from driver's
door and passenger's door lock switch while the driver's door and passenger's
door are closed.
CIRCUIT
RODIUS 2004.09
B. Rear room lamp
- The rear room lamp comes on when opening the rear door while the door coupled rear
room lamp switch is pressed (except for luggage room lamp).
door or passenger's
- The rear room lamp extends its lighting period by 5 seconds when closing the rear
- door.
The room lamp output stops immediately after turning the ignition key to "ON"
- position during the extended period.
The room lamp output stops immediately after receiving the lock signal from the rear
door lock switch or the remote control key while the rear door is closed.