SSANGYONG RODIUS 2004.09 Manual page 123

B. DESCRIPTIONS OF TERMINALS C. TUNER / 5.1 CHANNEL AMP WITH BUILT-IN DSP / DVD NAVIGATION (DVD SYSTEM
BASIC)
▶Tuner
A tuner filters and cuts unnecessary signals among received signals and then precisely
adjusts input signals. Installed tuner has following functions. Connecting terminal of the
tuner receives amplified signals from each TV antenna module locating rear quarter glass
that receives TV signals from glass antenna and then inputs to left and right channel.
AM/FM radio module on the roof panel rear end receives amplified signals from glass
antenna and then transmits to tuner input (1 channel).
▶DVD Navigation (CHINA Only)
Navigation unit in this vehicle transmits huge amount of data on the DVD CD directly to AV
head unit, without via tuner and AMP. It has 3D view function for roads and buildings and
supporting data. GPS antenna to receive/send vehicle position from/to satellite is located
behind the Instrument panel.
▶5.1 Channel power amplifier with built-in DSP
DVD system displays high quality pictures and separates digital audio sources to give
digital effects according to speaker arrangement. A chipset that can treat digital audio
source signal is installed on the exterior AMP and has following function.
▷DSP (Digital Signal Processor) function
AC-3, DTS 5.1 channel decoder (Decoder: separates and analyzes audio source)
·
· Dolby Pro Logic, Dolby Pro Logic II function
Sound filed setting (HALL/CHURCH/STADIUM/CLUB)
·
· Equalizer mode (Classic/Jazz/Pop/Rock)
Speaker output control (All/driver's side/passenger's side/rear seats)
▷Speaker control (Basic function)
Terminals on the below connector control speaker output. Terminals decode according
to speakers like front, rear, center and tweeter and output separated sound. Decoded
signal goes to subwoofer that has built-in AMP and the AMP in the woofer outputs
sound directly.
0-79
8910-01
CIRCUIT
RODIUS 2004.09