Transponder/tags
7.3 SIMATIC RF620T
7.3.4
Mounting instructions
CAUTION
Level mounting
Please note that both the transponder and the spacer must be mounted on a level surface.
CAUTION
The screw fixing element was tested with the types of screws, spring washers and plain
washers indicated below. Depending on the application area, the user must use similar,
correspondingly certified screws, spring washers and plain washers (e.g. for the food
processing industry).
EJOT screws can be additionally etched and passivated in some areas of the food
processing industry, e.g if they made of stainless steel A2. In other areas without special
requirements, the screws can be, for example, zinc plated and blue passivated.
Note
In case of high mechanical loads (such as shocks or vibration), the transponder must be
fixed onto the spacer by means of screws.
200
System Manual, 10/2009, J31069-D0171-U001-A8-7618
SIMATIC RF600